{"title":"BDS Performance Towing","description":null,"products":[{"product_id":"bds-performance-towing-air-suspension-load-leveling-kit-2-4-inch-lift-2019-2026-gm-1500-includes-trailboss-zr2-at4-and-at4x-stock-height","title":"BDS Performance Towing Air Suspension Load Leveling kit | 2 - 4 inch lift | 2019-2026 GM 1500 (includes Trailboss, ZR2, AT4 and AT4X stock height)","description":"\u003ch1 class=\"productView-title\"\u003e\u003cspan\u003eBDS Performance Towing Air Suspension Load Leveling kit | 2 - 4 inch lift | 2019-2026 GM 1500 (includes Trailboss, ZR2, AT4 and AT4X stock height)\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eTake control of heavy loads and towing duties with the BDS Performance Towing Load Leveling System for 2019-2026 Chevrolet and GMC 1500 pickup trucks which includes Trailboss, ZR2, AT4 and AT4X trim levels. Designed to fit trucks from 2.5-4 inches of lift, these systems are engineered, tested, and manufactured in Coldwater, Michigan by BDS Suspension to deliver dependable load support without compromising suspension performance.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional air spring systems, the BDS Performance Towing Load Leveling System features a rubber-isolated lower air spring mount with an innovative design that allows the axle to separate from the air spring at full suspension extension. This unique setup maintains maximum suspension travel while protecting air spring components during off-road use and uneven terrain.\u003c\/p\u003e\n\u003cp\u003eBuilt for long-term durability, each kit includes heavy-duty air springs designed to safely operate at zero PSI when unloaded, providing a smooth factory-like ride when additional load support isn't needed. High-quality DOT-approved nickel-plated brass air fittings and DOT air brake line ensure reliable performance and leak-free operation, while the included tee fitting allows both air springs to be connected to a single fill point for simple pressure adjustment.\u003c\/p\u003e\n\u003cp\u003eBDS simplifies product selection by offering a single part number for each application. Rather than multiple options, every BDS Performance Towing Load Leveling System is equipped with the largest air spring and highest load-carrying capacity package that can be packaged within the vehicle. Operating within a pressure range of 0-125 PSI, these heavy-duty air springs generate enough lifting force to support loads that exceed the vehicle manufacturer's recommended payload capacity. However, it is important to note that while the BDS Performance Towing Load Leveling System can help level and stabilize heavily loaded vehicles, it does not increase the OEM Gross Vehicle Weight Rating (GVWR), payload rating, axle ratings, or towing capacity of the vehicle. Always operate within the manufacturer's specified weight limits.\u003c\/p\u003e\n\u003cp\u003eFor the ultimate towing and hauling experience, BDS recommends pairing this system with the BDS129006 onboard compressor system and optional GM 1500 mounting bracket (BDS131803) for a clean, straightforward installation and convenient in-cab air pressure control. To further enhance vehicle stability and control under load, add a set of FOX shocks. Engineered to provide improved damping performance, FOX shocks help reduce body motion, improve handling, and deliver greater confidence when towing heavy trailers or hauling substantial payloads. Together, the BDS Performance Towing Load Leveling System and FOX shocks create a complete suspension package that sets a new standard of performance for towing and hauling.\u003c\/p\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":52129715487016,"sku":"BDS131907","price":1199.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-leveling-kit-2-4-inch-lift-2019-2026-gm-1500-includes-trailboss-zr2-at4-and-at4x-stock-heightbds-4207855.png?v=1784381348"},{"product_id":"bds-bds-performance-towing-air-suspension-load-leveling-kit-6-inch-lift-gm-1500-2019-2026","title":"BDS Performance Towing Air Suspension Load Leveling kit | 6 inch lift | GM 1500 2019-2026","description":"\u003cdiv class=\"custom_overview\"\u003e\n\u003cdiv class=\"custom_overview_left\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch2\u003eBDS BDS Performance Towing Air Suspension Load Leveling kit | 6 inch lift | GM 1500 2019-2026\u003c\/h2\u003e\n\u003cp\u003eTake control of heavy loads and towing duties with the BDS Performance Towing Load Leveling System for 2019-2026 Chevrolet and GMC 1500 pickup trucks. Designed to fit trucks from 6-7 inches of lift over a standard half ton, these systems are engineered, tested, and manufactured in Coldwater, Michigan by BDS Suspension to deliver dependable load support without compromising suspension performance.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional air spring systems, the BDS Performance Towing Load Leveling System features a rubber-isolated lower air spring mount with an innovative design that allows the axle to separate from the air spring at full suspension extension. This unique setup maintains maximum suspension travel while protecting air spring components during off-road use and uneven terrain.\u003c\/p\u003e\n\u003cp\u003eBuilt for long-term durability, each kit includes heavy-duty air springs designed to safely operate at zero PSI when unloaded, providing a smooth factory-like ride when additional load support isn't needed. High-quality DOT-approved nickel-plated brass air fittings and DOT air brake line ensure reliable performance and leak-free operation, while the included tee fitting allows both air springs to be connected to a single fill point for simple pressure adjustment.\u003c\/p\u003e\n\u003cp\u003eBDS simplifies product selection by offering a single part number for each application. Rather than multiple options, every BDS Performance Towing Load Leveling System is equipped with the largest air spring and highest load-carrying capacity package that can be packaged within the vehicle. Operating within a pressure range of 0-125 PSI, these heavy-duty air springs generate enough lifting force to support loads that exceed the vehicle manufacturer's recommended payload capacity. However, it is important to note that while the BDS Performance Towing Load Leveling System can help level and stabilize heavily loaded vehicles, it does not increase the OEM Gross Vehicle Weight Rating (GVWR), payload rating, axle ratings, or towing capacity of the vehicle. Always operate within the manufacturer's specified weight limits.\u003c\/p\u003e\n\u003cp\u003eFor the ultimate towing and hauling experience, BDS recommends pairing this system with the BDS129006 onboard compressor system and optional GM 1500 mounting bracket (BDS131803) for a clean, straightforward installation and convenient in-cab air pressure control. To further enhance vehicle stability and control under load, add a set of FOX shocks. Engineered to provide improved damping performance, FOX shocks help reduce body motion, improve handling, and deliver greater confidence when towing heavy trailers or hauling substantial payloads. Together, the BDS Performance Towing Load Leveling System and FOX shocks create a complete suspension package that sets a new standard of performance for towing and hauling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"custom_overview_right\"\u003e\n\u003cdiv class=\"feature_benefits_panel\"\u003e\n\u003cp class=\"title\"\u003eFeatures \u0026amp; Benefits\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eUnique design with rubber isolated stamped steel cradle which does not limit droop travel.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eWorks with all in-bed hitches\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eEasy installation \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eOperates safely unloaded at 0 PSI.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eFits 6 inches advertised lift.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eRobust air springs with steel rolled crimp end caps.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eDOT air fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eTee fitting included along with dual inflation valves for all use cases.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003eFits all wheel and tire combinations.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"help_text_container\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"p65_warning\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":52133818532136,"sku":"BDS131908","price":1199.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-bds-performance-towing-air-suspension-load-leveling-kit-6-inch-lift-gm-1500-2019-2026bdsbds131908-9795704.png?v=1784463848"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-inch-lift-ford-f-150-4wd-2015-2020-bds8311","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 6 Inch Lift | Ford F-150 4WD 2015-2020","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-150 4WD 2015-2020. This kit suits trucks with 6 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890611487016,"sku":"BDS8311","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-inch-lift-ford-f-150-4wd-2015-2020bdsbds8311-9378541.jpg?v=1792063877"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-inch-lift-ford-f-150-4wd-2015-2026-bds133905","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 6 Inch Lift | Ford F-150 4WD 2015-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-150 4WD 2015-2026. This kit suits trucks with 4.5 to 6 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890611552552,"sku":"BDS133905","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-inch-lift-ford-f-150-4wd-2015-2026bdsbds133905-8925370.jpg?v=1792063877"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-inch-lift-ford-f-150-4wd-2021-2026-bds8310","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 6 Inch Lift | Ford F-150 4WD 2021-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-150 4WD 2021-2026. This kit suits trucks with 6 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890611519784,"sku":"BDS8310","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-inch-lift-ford-f-150-4wd-2021-2026bdsbds8310-1261250.jpg?v=1792063876"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ford-f-250-f-350-srw-4wd-2017-2026-bds133900","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | Ford F-250 \/ F-350 SRW 4WD 2017-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-250 \/ F-350 Super Duty SRW 4WD 2017-2026. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890611585320,"sku":"BDS133900","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ford-f-250-f-350-srw-4wd-2017-2026bdsbds133900-4097456.jpg?v=1792063875"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-5-inch-lift-with-factory-overloads-gm-2500hd-3500hd-2020-2026-bds8112","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 5 Inch Lift | With Factory Overloads | GM 2500HD \/ 3500HD 2020-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2020-2026. This kit suits trucks with 5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890613190952,"sku":"BDS8112","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-5-inch-lift-with-factory-overloads-gm-2500hd-3500hd-2020-2026bdsbds8112-6961725.jpg?v=1792063877"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-6-5-inch-lift-with-factory-overloads-gm-2500hd-3500hd-4wd-2011-2019-bds8116","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 6.5 Inch Lift | With Factory Overloads | GM 2500HD \/ 3500HD 4WD 2011-2019","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2011-2019. This kit suits trucks with 6.5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890613289256,"sku":"BDS8116","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-65-inch-lift-with-factory-overloads-gm-2500hd-3500hd-4wd-2011-2019bdsbds8116-6721417.jpg?v=1792063876"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-6-5-inch-lift-without-factory-overloads-gm-2500hd-3500hd-4wd-2011-2019-bds8117","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 6.5 Inch Lift | Without Factory Overloads | GM 2500HD \/ 3500HD 4WD 2011-2019","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2011-2019. This kit suits trucks with 6.5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890613223720,"sku":"BDS8117","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-65-inch-lift-without-factory-overloads-gm-2500hd-3500hd-4wd-2011-2019bdsbds8117-5720909.jpg?v=1792063876"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-5-inch-lift-without-factory-overloads-gm-2500hd-3500hd-2020-2026-bds8113","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 5 Inch Lift | Without Factory Overloads | GM 2500HD \/ 3500HD 2020-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2020-2026. This kit suits trucks with 5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890613256488,"sku":"BDS8113","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-5-inch-lift-without-factory-overloads-gm-2500hd-3500hd-2020-2026bdsbds8113-9390400.jpg?v=1792063876"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-5-inch-lift-with-factory-overloads-gm-2500hd-3500hd-2020-2026-bds8114","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 6.5 Inch Lift | With Factory Overloads | GM 2500HD \/ 3500HD 2020-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2020-2026. This kit suits trucks with 6.5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890613485864,"sku":"BDS8114","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-65-inch-lift-with-factory-overloads-gm-2500hd-3500hd-2020-2026bdsbds8114-9920009.jpg?v=1792063876"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ford-f-150-4wd-2015-2026-bds133903","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | Ford F-150 4WD 2015-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-150 4WD 2015-2026. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890613551400,"sku":"BDS133903","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ford-f-150-4wd-2015-2026bdsbds133903-9495553.jpg?v=1792063876"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-5-inch-lift-without-factory-overloads-gm-2500hd-3500hd-2020-2026-bds8115","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 6.5 Inch Lift | Without Factory Overloads | GM 2500HD \/ 3500HD 2020-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2020-2026. This kit suits trucks with 6.5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890613518632,"sku":"BDS8115","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-65-inch-lift-without-factory-overloads-gm-2500hd-3500hd-2020-2026bdsbds8115-2004173.jpg?v=1792063875"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-4-7-inch-lift-ford-f-250-f-350-srw-4wd-2017-2026-bds133901","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 4 - 7 Inch Lift | Ford F-250 \/ F-350 SRW 4WD 2017-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-250 \/ F-350 Super Duty SRW 4WD 2017-2026. This kit suits trucks with 4 to 7 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890613584168,"sku":"BDS133901","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-4-7-inch-lift-ford-f-250-f-350-srw-4wd-2017-2026bdsbds133901-8715660.jpg?v=1792063875"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ram-2500-4wd-2014-2026-bds132952","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | RAM 2500 4WD 2014-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the RAM 2500 4WD 2014-2026. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS132802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615255336,"sku":"BDS132952","price":1299.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ram-2500-4wd-2014-2026bdsbds132952-3616159.jpg?v=1791981069"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-4-6-inch-lift-ram-2500-4wd-2014-2026-bds132953","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 4 - 6 Inch Lift | RAM 2500 4WD 2014-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the RAM 2500 4WD 2014-2026. This kit suits trucks with 4 to 6 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS132802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615288104,"sku":"BDS132953","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-4-6-inch-lift-ram-2500-4wd-2014-2026bdsbds132953-4486275.jpg?v=1792063875"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-4-6-inch-lift-ram-3500-4wd-2019-2026-bds132951","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 4 - 6 Inch Lift | RAM 3500 4WD 2019-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the RAM 3500 4WD 2019-2026. This kit suits trucks with 4 to 6 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS132802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615353640,"sku":"BDS132951","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-4-6-inch-lift-ram-3500-4wd-2019-2026bdsbds132951-5788549.jpg?v=1792063873"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-2-inch-levelled-toyota-tundra-4wd-2022-2026-bds138900","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 2 Inch Levelled | Toyota Tundra 4WD 2022-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Toyota Tundra 4WD 2022-2026. This kit suits trucks with stock height to 2 inches levelled, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS138801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615386408,"sku":"BDS138900","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-2-inch-levelled-toyota-tundra-4wd-2022-2026bdsbds138900-7990244.jpg?v=1792063873"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-2-inch-lift-gm-1500-2019-2026-bds131906","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 2 Inch Lift | GM 1500 2019-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado 1500 \/ GMC Sierra 1500 2019-2026. This kit suits trucks with stock height to 2 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131803 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615550248,"sku":"BDS131906","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-2-inch-lift-gm-1500-2019-2026bdsbds131906-9194892.jpg?v=1792063874"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-4-5-inch-lift-jeep-gladiator-jt-2020-2026-bds134901","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 4.5 Inch Lift | Jeep Gladiator JT 2020-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Jeep Gladiator JT 4WD 2020-2026. This kit suits trucks with 4 to 5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS134801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615583016,"sku":"BDS134901","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-45-inch-lift-jeep-gladiator-jt-2020-2026bdsbds134901-5379508.jpg?v=1792063873"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-6-5-inch-lift-gm-2500hd-3500hd-2011-2019-bds131905","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 6.5 Inch Lift | GM 2500HD \/ 3500HD 2011-2019","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2011-2019. This kit suits trucks with 6.5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615648552,"sku":"BDS131905","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-65-inch-lift-gm-2500hd-3500hd-2011-2019bdsbds131905-2017494.jpg?v=1792063874"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ram-3500-4wd-2019-2026-bds132950","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | RAM 3500 4WD 2019-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the RAM 3500 4WD 2019-2026. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS132802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615681320,"sku":"BDS132950","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ram-3500-4wd-2019-2026bdsbds132950-4845908.jpg?v=1792063872"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-6-inch-lift-ram-1500-4wd-2019-2026-bds132905","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 6 Inch Lift | RAM 1500 4WD 2019-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the RAM 1500 4WD 2019-2026. This kit suits trucks with 4.5 to 6 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS132801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615714088,"sku":"BDS132905","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-6-inch-lift-ram-1500-4wd-2019-2026bdsbds132905-4318084.jpg?v=1792063872"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-4-5-inch-lift-ford-f-250-f-350-srw-4wd-2017-2026-bds8305","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 4 - 5 Inch Lift | Ford F-250 \/ F-350 SRW 4WD 2017-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-250 \/ F-350 Super Duty SRW 4WD 2017-2026. This kit suits trucks with 4 to 5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615779624,"sku":"BDS8305","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-4-5-inch-lift-ford-f-250-f-350-srw-4wd-2017-2026bdsbds8305-7522737.jpg?v=1792063872"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-6-7-inch-lift-ford-f-250-f-350-srw-4wd-2017-2026-bds8306","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 6 - 7 Inch Lift | Ford F-250 \/ F-350 SRW 4WD 2017-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-250 \/ F-350 Super Duty SRW 4WD 2017-2026. This kit suits trucks with 6 to 7 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890615845160,"sku":"BDS8306","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-6-7-inch-lift-ford-f-250-f-350-srw-4wd-2017-2026bdsbds8306-5671704.jpg?v=1792063872"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-gm-2500hd-3500hd-2011-2019-bds131903","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | GM 2500HD \/ 3500HD 2011-2019","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2011-2019. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890617090344,"sku":"BDS131903","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-gm-2500hd-3500hd-2011-2019bdsbds131903-5203471.jpg?v=1792063871"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-jeep-gladiator-jt-2020-2026-bds134900","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | Jeep Gladiator JT 2020-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Jeep Gladiator JT 4WD 2020-2026. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS134801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890617483560,"sku":"BDS134900","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-jeep-gladiator-jt-2020-2026bdsbds134900-1394678.jpg?v=1792063871"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-4-5-inch-lift-ram-1500-4wd-2019-2026-bds132904","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 4 - 5 Inch Lift | RAM 1500 4WD 2019-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the RAM 1500 4WD 2019-2026. This kit suits trucks with 4 to 5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS132801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890617647400,"sku":"BDS132904","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-4-5-inch-lift-ram-1500-4wd-2019-2026bdsbds132904-4051945.jpg?v=1792063871"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-upgrade-kit-5-6-5-inch-lift-gm-2500hd-3500hd-2020-2026-bds131901","title":"BDS Performance Towing Air Suspension Load Levelling Upgrade Kit | 5 - 6.5 Inch Lift | GM 2500HD \/ 3500HD 2020-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2020-2026. This kit suits trucks with 5 to 6.5 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890617680168,"sku":"BDS131901","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-upgrade-kit-5-65-inch-lift-gm-2500hd-3500hd-2020-2026bdsbds131901-7276581.jpg?v=1792063872"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-3-4-inch-lift-ford-f-150-4wd-2015-2026-bds133904","title":"BDS Performance Towing Air Suspension Load Levelling Kit | 3 - 4 Inch Lift | Ford F-150 4WD 2015-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Ford F-150 4WD 2015-2026. This kit suits trucks with 3 to 4 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS133802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890618433832,"sku":"BDS133904","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-3-4-inch-lift-ford-f-150-4wd-2015-2026bdsbds133904-8910436.jpg?v=1792063872"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ram-1500-4wd-2019-2026-bds132903","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | RAM 1500 4WD 2019-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the RAM 1500 4WD 2019-2026. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS132801 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890620498216,"sku":"BDS132903","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-ram-1500-4wd-2019-2026bdsbds132903-4340545.jpg?v=1792152429"},{"product_id":"bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-gm-2500hd-3500hd-2020-2026-bds131900","title":"BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | GM 2500HD \/ 3500HD 2020-2026","description":"\u003cp\u003eTake control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the Chevrolet Silverado \/ GMC Sierra 2500HD \/ 3500HD 2020-2026. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.\u003c\/p\u003e\u003cp\u003eUnlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.\u003c\/p\u003e\u003cp\u003eEach kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.\u003c\/p\u003e\u003cp\u003eBDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.\u003c\/p\u003e\u003cp\u003eFor the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS131802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-isolated stamped steel cradle that does not limit droop travel\u003c\/li\u003e\n\u003cli\u003eWorks with all in-bed hitches\u003c\/li\u003e\n\u003cli\u003eOperates safely unloaded at 0 PSI\u003c\/li\u003e\n\u003cli\u003eRobust air springs with steel rolled crimp end caps\u003c\/li\u003e\n\u003cli\u003eDOT air fittings and air brake line\u003c\/li\u003e\n\u003cli\u003eTee fitting included for a single fill point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":67890625249576,"sku":"BDS131900","price":1399.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/files\/bds-performance-towing-air-suspension-load-levelling-kit-stock-3-inch-lift-gm-2500hd-3500hd-2020-2026bdsbds131900-2375769.jpg?v=1792063871"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0165\/6516\/collections\/bds-performance-towing-1702113.png?v=1784380872","url":"https:\/\/www.offroadindustries.com.au\/collections\/bds-performance-towing.oembed?page=2","provider":"Offroad Industries","version":"1.0","type":"link"}