100w Lightforce 170 Striker Fast Start HID Xenon Conversion Kit
Offroad Industries are an Australian distributor of quality HID Xenon products, all our items are locally stocked in Melbourne Australia.
Key Features of the 100w Lightforce 170 Striker Fast Start HID Xenon Conversion Kits
- All our 100w HID Conversion kits we only stock AC (Alternating Current) Digital Ballast, not the poor quality DC (Direct Current) Ballast
- Offroad Industries 100w HID Xenon Conversion kits, use the latest slimmer ballast, has less failure rate and the warm up time is almost instantaneously, so consider some of these when purchasing your next 100w conversion kit.
- Offroad Industries 100w HID Xenon conversion kits are a genuine 100w HID conversion not re-badged 75w kits as they look the same. So check and compare other manufactures as to often we are helping customers that have mistakenly purchased 100w kit however when you look at the back of the ballast they are actually 75w version.
- Quality UV stable 100w Globes, they will not fade or stain the lens of your Lightforce 170 Assembly.
- Offroad Industries 100w Lightforce Conversion kits comes with full instructions, with diagrams and written in English.
- 100w Lightforce 170 Conversion kits comes with a complete wiring loom, includes relay fuse, and heavy duty cabling.
- All our 100w HID Conversion kits come with a FULL 12 Month Warranty
Due to the size of the 100w Ballast, they cannot fit inside the actual Lightforce 170 Housing we recommend using our HID extension leadsthey make installing and mounting ballast much simpler as they simply plug and connect to the existing wires.
- For our driving light HID conversion kits we offer two choice of globe colours, 4300k colour provides the most output of light and is a natural white, where the 6000k is a diamond white with a tinge of blue.
Technical Aspects of the 100w Fast Start HID Conversion kit for Lightforce 170 Striker
Ballast can't be internally mounted.
Spotlights not included, this is a conversion kit only.
- 2 x 100w Fast Start SLIM AC Digital Ballasts
- 2 x 100w Shadow Free HID Globes specific to the Lightforce 170 Lights choice of 4300k or 6000k
- 2 x CNC Machined Anodised adapters, to reduce the shadow of the globe output and provide the correct focal length required for the Lightforce 170.
- 2 x Circlips
- 1 X Heavy Duty Wiring Loom
- Light output is 10,000 Lumens of Light Brightest HID kit.
- 100w of power consumption, same as a standard halogen light setup yet 5 times the brightness.
Note: Cutting or Modify the ends of the kits will void the warranty, as these HID kits use special silicon coated wired normal electrical wire will earth out via the shield and thus will cause the ballast to short circuit thus voiding warranty. Save time and frustrations and purchase some extension leads if your intending on extending the wires.
FAQ Offroad Industries 100w HID Xenon Conversion kits
- What is your warranty?
- We have a full 12 month warranty in place, all items are replaced not repaired should they be deemed faulty
- Do you provide instruction with your HID Xenon Conversion kits?
- Yes all conversion kits come with detailed instructions & diagrams.
- Do you have spare parts to suit the 100w HID Xenon Conversion kits?
- Yes we carry a full range of Accessories & Spare parts these are located on our Accessories section of our website.
No PO Box accepted must be a physical address. Shipped via Toll Express.
We Also Recommend