BDS Performance Towing Air Suspension Load Levelling Kit | Stock - 3 Inch Lift | RAM 2500 4WD 2014-2026

Take control of heavy loads and towing with the BDS Performance Towing Load Levelling System for the RAM 2500 4WD 2014-2026. This kit suits trucks with stock height to 3 inches of lift, and is engineered, tested and manufactured in Coldwater, Michigan by BDS Suspension to give dependable load support without compromising suspension performance.

Unlike traditional air spring systems, the BDS kit uses a rubber-isolated lower air spring mount that lets the axle separate from the air spring at full suspension extension. You keep maximum suspension travel, and the air spring components are protected off-road and over uneven terrain.

Each kit includes heavy-duty air springs designed to run safely at zero PSI when unloaded, so you get a smooth, factory-like ride when you are not carrying a load. DOT-approved nickel-plated brass air fittings and DOT air brake line give reliable, leak-free operation, and the included tee fitting connects both air springs to a single fill point for easy pressure adjustment.

BDS offers one part number per application, fitted with the largest air spring and highest load-carrying capacity that will package in the vehicle. Operating between 0 and 125 PSI, the air springs level and stabilise a heavily loaded truck. They do not increase the vehicle's GVM, payload, axle ratings or towing capacity, so always stay within the manufacturer's limits.

For the complete towing setup, pair this kit with the BDS129006 onboard compressor system and the optional BDS132802 mounting bracket for in-cab air pressure control. Adding a set of FOX shocks further improves stability and control under load.

• Rubber-isolated stamped steel cradle that does not limit droop travel
• Works with all in-bed hitches
• Operates safely unloaded at 0 PSI
• Robust air springs with steel rolled crimp end caps
• DOT air fittings and air brake line
• Tee fitting included for a single fill point